IEI Integration NANO-LX v1.00 - Manual (Page 125)

NANO-LX CPU Card
125
Onboard Parallel Port [378/IRQ7]
Use the Onboard Parallel Port option to specify a logical LPT port address and
corresponding interrupt for the physical parallel port. The Onboard Parallel Port options
are:
Disabled
378/IRQ7 (Default)
278/IRQ5
3BC/IRQ7
Parallel Port Mode [SPP]
Use the Parallel Port Mode option to select parallel port operation mode.
SPP (Default) The parallel port operates in the standard parallel port
(SPP) mode. This parallel port mode works with most
parallel port devices but is slow.
EPP The parallel port operates in the enhanced parallel port
mode (EPP). The EPP mode supports bi-directional
communication between the system and the parallel port
device and the transmission rates between the two are
much faster than the SPP mode.
ECP The parallel port operates in the extended capabilities
port (ECP) mode. The ECP mode supports bi-directional
communication between the system and the parallel port
device and the transmission rates between the two are
much faster than the SPP mode.
ECP+EPP The parallel port is compatible with both ECP and EPP
devices.
Normal