Technical specifications, 2 technical specifications – IEI Integration NANO-LX v1.00 User Manual
Page 19

NANO-LX CPU Card
19
1.2.2 Technical Specifications:
NANO-LX CPU card technical specifications are listed in Table 1-1. Detailed descriptions
of each specification can be found in Chapter 2.
SPECIFICATION
CPUs Supported
AMD Geode LX 800
Cache Memory
64K I/ 64k D L1 cache, 128K L2 cache
System Chipset
AMD CS5536
I/O Controller
AMD CS5536
Memory
One 200-pin DDR 333/400MHz SO-DIMM SDRAM with a
maximum size of 1GB.
PCI Bus Interface
Revision 2.2
Super IO
W83627EHG
Display CRT
integrated
in AMD™ Geode LX 800
TTL/ LVDS
24 bit TTL integrated in AMD LX 800 18 bit LVDS
HDD Interface
One IDE channel supports two Ultra ATA 100/66/33
devices
Power Support
AT/ATX power support
Power Consumption
+12V @ 0.92A (DDR400 256MB)
Power Management
Supports Advanced Configuration and Power Interface
(ACPI) Specifications Revision 2.0
Watchdog Timer
Software programmable supports 1~255 sec. system
reset
I/O Interfaces
1 x FDD
1 x LPT
1 x CFII
1 x IDE
6 x RS-232
1 x RS-422/485
2 x Sata channels
PC/104-Plus Interface
Direct ISA DMA mode operation.
Infrared Support
One Infrared Data Association (IrDA) interface
Real Time Clock
256-byte battery backed CMOS RAM
Hardware Monitoring
CPU temperature and system voltages