IEI Integration NANO-LX v1.00 User Manual
Page 105

NANO-LX CPU Card
105
IDE HDD Auto-Detection [Press Enter]
Use the IDE HDD Auto-Detection option to enable BIOS to automatically detect the IDE
settings. Select IDE HDD Auto-Detection and press E
NTER
. BIOS automatically detects
the HDD type. Do not set this option manually.
IDE Primary Master [Auto]
Use the IDE Primary Master option to activate or deactivate the following drive channels:
Channel 0 Master
Channel 0 Slave
Channel 1 Master
Channel 0 Slave
None
If no drives are connected to the IDE channel select this
option. Once set, this IDE channel becomes
inaccessible and any drives attached to it are
undetected.
Auto
(Default)
Setting this option allows the device to be automatically
detected by the BIOS.
Manual
Selecting this option allows manual configuration of the
device on the IDE channel in BIOS.
Access Mode [Auto]
The Access Mode option can only be configured if the IDE Primary Master is set to either
Manual or Auto. Use the Access Mode option to determine the hard disk BIOS translation
modes. Most systems now use hard drives with large capacities and therefore either the
LBA translation mode or auto mode should be selected.
CHS
Select this mode if the HDD capacity is less than 504MB.