IEI Integration NANO-LX v1.00 - Manual (Page 109)

NANO-LX CPU Card
109
Disabled (Default) The system cannot be booted from a remote system
through the LAN.
Enabled The system can be booted from a remote system
through the LAN.
SATA Boot ROM Control [Disabled]
Use the SATA Boot ROM Control option to configure SATA IDE use in DOS mode.
Disabled (Default) Disables SATA IDE use in DOS mode.
Enabled Enables SATA IDE use in DOS mode.
Boot Device
Use the Boot Device options to select the order of the devices the system boots from.
There are three boot device configuration options:
First Boot Device [Default: Floppy]
Second Boot Device [Default: HDD-0]
Third Boot Device [Default: CDROM]
Using the default values, the system first looks for a floppy disk to boot from. If it cannot find
a floppy disk, it boots from an HDD. If both The floppy and the HDD are unavailable, the
system boots from a CDROM drive.
Boot Device configuration options are:
Floppy
LS120
HDD-0
SCSI
CDROM
HDD-1
ZIP100