IEI Integration NANO-LX v1.00 - Manual (Page 115)

NANO-LX CPU Card
115
CPU Frequency [500MHz]
Use the CPU Frequency option to set the CPU frequency.
500MHz (Default)
Memory Frequency [266MHz]
Use the Memory Frequency option to set the frequency of the installed DRAM modules.
The Memory Frequency options are:
200MHz
266MHz (Default)
333MHz
400MHz
CAS Latency [Auto]
Use the CAS Latency Time option to set the Column Address Strobe (CAS) delay time.
The CAS Latency Time options are:
Auto (Default)
1.5 nanoseconds
2.0 nanoseconds
2.5 nanoseconds
3.0 nanoseconds
3.5 nanoseconds
Interleave Select [LOI]
Use the Interleave Select option to specify how the cache memory is interleaved.
LOI (Default) Low order interleaving (LOI) of memory occurs.
HOI High order interleaving (HOI) of memory occurs.
Video Memory Size [8M]
Use the Video Memory Size option to determine how much memory is allocated to the
video graphics device. The Video Memory Size options are: