IEI Integration NANO-LX v1.00 - Manual (Page 92)

92 IEI ® Technology, Corp.
Push the SO-DIMM chip into the socket at an angle. (See Figure 4-1) Step 2:
Step 3:
Step 4:
Step 1:
Step 2:
Gently pull the arms of the SO-DIMM socket out and push the rear of the
SO-DIMM module down. (See Figure 4-1)
Release the arms of the SO-DIMM socket. They clip into place and secure the
SO-DIMM module in the socket. Step 0:
Figure 4-1: SO-DIMM Module Installation
4.3.2 Mounting the NANO-LX Embedded Module
The NANO-LX embedded module has a standard PC/104-PLUS connector on the front
side. Baseboards can be designed by the end user, customized by IEI, or purchased from
IEI. For more information visit the IEI website ( www.ieiworld.com ) or contact an IEI sales
representative.
To install the module, follow the instructions below.
Align the PC/104-PLUS connector with the corresponding connector on a
compatible module.
Gently push the embedded module down to ensure the connectors are properly
connected. Step 0: