IEI Integration IEM-9452 - Manual (Page 85)

IEM-9452 ETX Module
Page 69
378 D EFAULT Parallel Port I/O port address is 378
278 Parallel Port I/O port address is 278
3BC Parallel Port I/O port address is 3BC
Parallel Port Mode [Normal]
Use the Parallel Port Mode option to select the mode the parallel port operates in.
Normal D EFAULT The normal parallel port mode is the standard mode
for parallel port operation.
EPP The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.
ECP The parallel port operates in the extended
capabilities port (ECP) mode. The ECP mode
supports bi-directional communication between the
system and the parallel port device and the
transmission rates between the two are much faster
than the Normal mode
ECP+EPP The parallel port is also be compatible with EPP and
ECP `devices described above
Parallel Port IRQ [IRQ7]
Use the Parallel Port IRQ option to set the parallel port interrupt address.
IRQ5 IRQ5 is assigned as the parallel port interrupt address