IEI Integration IEM-9452 User Manual
Page 110
IEM-9452 ETX Module
Page 94
Boots Graphic Adapter Priority [Internal VGA]
Use the Boots Graphic Adapter Priority option to select the graphics controller used as
the primary boot device. Select either an integrated graphics controller (IGD) or a
combination of PCI graphics controller, a PCI express (PEG) controller or an IGD.
Configuration options are listed below:
IGD
PEG/IGD
PEG/PCI
PCI/PEG
PCI/IGD
D
EFAULT
Internal Graphics Mode Select [Enable, 8MB]
The Internal Graphic Mode Select option determines the amount of system memory that
can be used by the Internal graphics device.
Disable
Enable, 1MB
1MB of memory used by internal graphics device
Enable, 4MB
4MB of memory used by internal graphics device
Enable, 8MB
D
EFAULT
8MB of memory used by internal graphics device
Enable, 16MB
16MB of memory used by internal graphics device
Enable, 32MB
32MB of memory used by internal graphics device
Boot Display Device [Auto]
The Boot Display Device BIOS option selects the display device the system uses when it
boots. The available options are listed below:
Auto
D
EFAULT
CRT
LFP
CRT + LFP