IEI Integration IEM-9452 - Manual (Page 61)

IEM-9452 ETX Module
Page 45
components.
5.2 Unpacking
NOTE:
If any of the items listed below are missing when the IEM-9452 is
unpacked, do not proceed with the installation and contact the IEM-9452
reseller or vendor.
5.2.1 Unpacking Precautions
Before installing the IEM-9452, unpack the CPU module. Some components on IEM-9452
are very sensitive to static electricity and can be damaged by a sudden rush of power. To
protect it from being damaged, follow these precautions:
The user should ground them self to remove any static charge before
touching the IEM-9452. To do so wear a grounded wrist strap at all times or
frequently touch any conducting materials that is connected to the ground.
Handle the IEM-9452 by its edges. Do not touch the IC chips, leads or
circuitry if not necessary.
Do not place a PCB on top of an anti-static bag. Only the inside of the bag is safe from
static discharge.
5.2.2 Checklist
When unpacking the IEM-9452, please make sure that the package contains the following
items.
1 x IEM-9452 CPU module
1 x Heat spreader
1 x Heat sink
1 x Utility CD