IEI Integration IEM-9452 - Manual (Page 105)

IEM-9452 ETX Module
Page 89
NOTE:
Only the drives connected to the system are shown. For example, if only
two HDDs are connected only “1st Drive” and “2nd Drive” are listed.
The boot sequence from the available devices is selected. If the “1st Drive” option is
selected a list of available HDDs is shown. Select the first HDD the system boots from. If
the “1st Drive” is not used for booting this option may be disabled.
BIOS Menu 17: Hard Disk Drives
6.5.4 Removable Drives
Use the Removable Drives menu (BIOS Menu 18) to specify the boot sequence of the
available FDDs. When the menu is opened, the FDDs connected to the system are listed
as shown below:
1st Drive [1st FLOPPY DRIVE]