IEI Integration IEM-9452 - Manual (Page 40)

IEM-9452 ETX Module
Page 24
2.9 Environmental and Power Specifications
2.9.1 System Monitoring
Two thermal inputs on the IEM-9452 Super I/O Enhanced Hardware Monitor monitor the
following temperatures:
System temperature
CPU temperature
Five voltage inputs on the IEM-9452 Super I/O Enhanced Hardware Monitor monitor the
following voltages:
CPU
Memory
+3.3Vin
+5.0Vin
+5VSB
2.9.2 Operating Temperature and Temperature Control
The maximum and minimum operating temperatures for the IEM-9452 are listed below.
Minimum Operating Temperature: 0ºC (32°F)
Maximum Operating Temperature: 60°C (140°F)
A cooling fan and heat sink must be installed on the CPU. Thermal paste must be
smeared on the lower side of the heat sink before it is mounted on the CPU. Heat sinks
are also mounted on the Northbridge and Southbridge chipsets to ensure the operating
temperature of these chips remain low.
2.9.3 Power Consumption
Table 2-3 shows the power consumption parameters for the IEM-9452 running with a
1.5GHz Intel® Core™2 Duo L7400 processor and with a 512 MB, 667 MHz DDR2
SO-DIMM.