IEI Integration IEM-9452 - Manual (Page 118)

IEM-9452 ETX Module
Page 102
7.1 Available Software Drivers
NOTE:
The content of the CD may vary throughout the life cycle of the product
and is subject to change without prior notice. Visit the IEI website or
contact technical support for the latest updates.
The following drivers can be installed on the system:
Intel® Chipset driver
VGA driver (Intel® Graphics Media Accelerator Driver)
LAN driver (Intel Network Adapter)
Audio driver (Realtek AC`97 Audio Driver (ALC665))
Installation instructions are given below.
7.2 Driver CD Auto-run
All the drivers for the IEM-9452 are on the CD that came with the system. To install the
drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
NOTE:
If the system does not initiate the "autorun" program when the CD is
inserted, click the Start button, select Run, then type X:\autorun.exe
(where X:\ is the system CD drive) to access the IEI Driver CD main
menu.
Step 2: The driver main menu appears (Figure 7-1).