IEI Integration IEM-9452 - Manual (Page 62)

IEM-9452 ETX Module
Page 46
1 x QIG
If one or more of these items are missing, please contact the reseller or vendor the
IEM-9452 was purchased from and do not proceed any further with the installation.
5.3 IEM-9452 Embedded Module Installation
WARNING!
Never run the embedded module without an appropriate heat sink.
WARNING!
Please note that the installation instructions described in this manual should
be carefully followed in order to avoid damage to the CPU module
components and injury to the user.
WARNING!
When installing electronic components onto the embedded module or
installing the embedded module onto the baseboard, always take anti-static
precautions in order to prevent ESD damage to the CPU module and other
electronic components like the CPU and SO-DIMM module.
The following components must be installed onto the CPU module or connected to the
CPU module during the installation process.