ZOLL Thermogard XP IVTM System Operation Manual - Manual (Page 49)

Operation
18
Pre-Cool
The System bath is cooled to its lowest permitted temperature and maintained
at that temperature.
Pre-Warm
The System bath is heated to its highest possible temperature and maintained
at that temperature.
None
The Bath Pre-set is not activated or is cancelled. If cancelled, the bath is
maintained at the temperature that was measured at the time of cancellation.
Exit
Exits the menu without a change in System status or programming.
Time and Date
This menu displays the current time and date settings.
Figure 4-14. Time and Date Settings.
The time is divided into two fields: hours (designated “HH”) and minutes (“MM”).
The System uses only 24-hour time notation (e.g., 3:00 p.m. is 15:00).
The date is divided into three fields: year (designated “YYYY”) - month
(designated “MM”) - day (designated “DD”). For example, the 24
th
February, 1959
would be shown as: 1959-02-24.
Time Setting
1. The screen first displays the message “Select Hour. Press Enter to set.”
2. The numbers displayed in the hour field will change as you turn the knob.
When the correct hour is displayed, press the knob once to enter your
selection.
3. The screen next displays the message “Select Minute. Press Enter to
set.”
4. Turn the knob until the correct minute is displayed. Press the knob once
to enter your selection.
600479-001 Rev 2 49/147