Agilent Technologies N2610A - Manual (Page 76)

68 Agilent FrameScope 350 User’s Manual
3 Cable Testing with the FrameScope 350
Setting Up an Autotest
Auto-Increment settings for the field highlighted, and the start and
end values for the field highlighted.
2 If you want the numbers for any field to increase automatically with
each new label and test, highlight that field, then press Enable
Auto-Increment
so that a checkmark appears, as in the figure
above.
3 To set the beginning number for a field to other than 1, highlight the
category name, then press the Enter Start Value field. The onscreen
keyboard opens.
4 Press the backspace arrow to erase the number in the display, then
press the number or letter keys to enter the new starting value. Press
OK
. The keyboard closes, and the new starting value appears in the
Enter Start Value field.