Agilent Technologies N2610A - Manual (Page 175)

System Operations 7
Restore Default Settings
Agilent FrameScope 350 User’s Manual 167
4 If you want to clear the Operator List, press the Clear
Operator List checkbox.
5 If you want to clear custom test limits, press the Delete
Custom Limits checkbox.
6 Press OK to restore the factory-programmed settings and
clear the items you selected in
step 4 and step 5 .
7 Because this will erase any current settings, you are asked to
confirm. In the subsequent confirmation dialog boxes press
Yes to accept the resets. Press No to cancel the resets and
return to the System Settings screen.