Network testing overview – Agilent Technologies N2610A User Manual
Page 24
16
Agilent FrameScope 350 User’s Manual
2
Network Testing with the FrameScope 350
Network Testing Overview
Network Testing Overview
The following steps describe the general procedure for
performing network analysis testing using the FrameScope 350.
1
Power the unit on. See
“Switching the FrameScope On and
Off”
on page 10.
2
Press the Network tab on the Main Menu to begin.
3
Connect to the network under test. See
“Connecting to the
Network”
on page 12.
The FrameScope automatically begins to poll the network
and locate devices. See
“Examining the Network”
on page 17.
4
View details about the detected network resources. See
“Detailed List”
on page 18.
5
Perform an Autotest on any or all desired resources. See
“Running an Autotest”
on page 19.
6
Select any devices on the network and perform additional
testing, such as:
• Ping test; see
page 28
.
• Trace Route test; see
page 31
.
• SNMP Queries; see
page 34
.
7
Save results as desired, perform other tests or functions.