Agilent Technologies N2610A - Manual (Page 71)

Cable Testing with the FrameScope 350 3
Setting Up an Autotest
Agilent FrameScope 350 User’s Manual 63
I‚‡r) UurÃQ ‚svyrÀˆ†‡ÃirÆr‡Ã‡‚ÃI‚rГvГ‚ qr ǂÃpuhtrÇurÃT‡hqh q
1 On the Autotest Setup screen, press Standard, then Edit. The
Standard Setup screen displays.
2 Select the desired standard, then press OK. The Autotest Setup
screen will then show the selected standard. The selected standard is
applied to all subsequent tests.
Entering the Site Name
The site name identifies the group of settings used on a job, and
can be applied to test records for that site.
To enter the site name:
1 On the Autotest Setup screen, press Site, then press Edit. The Site
Setup screen displays.