Agilent Technologies N2610A User Manual
Page 119
Fiber Testing
4
Setting Up an Autotest
Agilent FrameScope 350 User’s Manual
111
1
On the Fiber Autotest Settings screen, press the connector icon, then
Edit
. The Connector Setup screen displays.
2
Press Next. A list of that connector types displays.
3
Press the type of the connector, then press OK. The Fiber Autotest
Setup screen displays, with the selected connector type next to the
connector icon. If you do not see the connector on the list, see the
next section.
Adding a new connector type
If you have a connector which is not in the connector database,
you can add a new connector description to the database.
1
If the manufacturer is not present, leave the manufacturer as
Unspecified. If the manufacturer is present in the list, select
it, then press Next. The next Connector Setup screen is
displayed. In either case you will be offered stored
- HP 16500B (38 pages)
- E4400-60230 (18 pages)
- Option H48 Multiport Test Set Z5623A (138 pages)
- hard disk drive kit e5052-90202 (13 pages)
- FIXTURE U7242A (10 pages)
- FS2010 (36 pages)
- USB/GPIB Interface Converter 82357A (70 pages)
- 34399A RS-232 (3 pages)
- 1100 Series (28 pages)
- N9340A (161 pages)
- HSSI WanProbe J3916A (179 pages)
- 37907A (16 pages)
- N1022A (24 pages)
- Agilent E6474A (184 pages)
- 82357B (34 pages)
- Agilent E1345A (5 pages)
- 85225F (148 pages)
- 8510C (16 pages)
- Wireless Network Optimization Platform E6474A (194 pages)
- J3919A (189 pages)
- AGILENT U2761A (123 pages)
- 85032B/E 50 (55 pages)
- 8510 (32 pages)
- J6800A (16 pages)
- E6474A (14 pages)
- N6314A (7 pages)
- 85107B (20 pages)
- 8753ET (28 pages)
- N9360A (44 pages)
- Agilent 82350B (51 pages)
- Agilent 4396B (124 pages)
- LXI (8 pages)
- E1439 (246 pages)
- U2802A (67 pages)
- Agilent Hard Disk Drive Kit E5071BU (12 pages)
- U2781A (47 pages)
- E1301B (244 pages)
- Multiple Channel Controller 85330A (166 pages)
- E6701A (32 pages)
- N2620A (279 pages)
- E5810A (159 pages)
- E5805A (47 pages)