Agilent Technologies N2610A - Manual (Page 30)

22 Agilent FrameScope 350 User’s Manual
2 Network Testing with the FrameScope 350
Running an Autotest
11 When you have finished setting up the test, press the Start
Test button (or press OK) on the Network Autotest Setup
screen. The test will begin.
12 To stop the test at any time press the Stop Test button.
13 To view information about a network element’s results, select
the element from the list and press the Details button.
14 Press the Save Results button to store the test data on the
CompactFlash™ card.
The rating numbers will range from 5 to 1, where 5 is best and 1
is worst. A red ‘X’ will be displayed if an error occurred during
the test. See the next section for how to change the metrics used
to derive the ratings.