IAI America XSEL Ethernet - Manual (Page 56)

- 50 -
Setting requirement
A: Required (function selection)
B: Required (network environment, etc.)
C: Checked (As a rule, the default value
on the parameter list must be used.)
Modbus/
TCP
IAI protocol
B/TCP
Transmission by
SEL program
No. Parameter name
Default value
(reference)
Input range Unit Remarks
B 149
IAI protocol B/TCP: IP
address of connection
destination
(MANU mode) (H)
192 0~255 * Setting of “0” and “127” is prohibited.
B 150
IAI protocol B/TCP: IP
address of connection
destination
(MANU mode) (MH)
168 0~255
B 151
IAI protocol B/TCP: IP
address of connection
destination
(MANU mode) (ML)
0 0~255
B 152
IAI protocol B/TCP: IP
address of connection
destination
(MANU mode) (L)
100 0~254 * Setting of “0” and “255” is prohibited.
B 153
IAI protocol B/TCP:
Port number of
connection destination
(MANU mode)
64611 0~65535
* In the server mode “0” can be set.
0 = Ignore port number of connection destination (Only
the IP address is checked.)
* In the client mode “0” cannot be set.
B 154
IAI protocol B/TCP: IP
address of connection
destination
(AUTO mode) (H)
192 0~255 * Setting of “0” and “127” is prohibited.
B 155
IAI protocol B/TCP: IP
address of connection
destination
(AUTO mode) (MH)
168 0~255
B 156
IAI protocol B/TCP: IP
address of connection
destination
(AUTO mode) (ML)
0 0~255
B 157
IAI protocol B/TCP: IP
address of connection
destination
(AUTO mode) (L)
100 0~254 * Setting of “0” and “255” is prohibited.