9 replace the mid-support wire – IAI America NS User Manual

Page 65

1. Maintenance

11.9 Replace the Mid-support Wire

[Items required for replacement]

Mid-support wire

Model: WR-LXMXS-(stroke)

Wire hook (base side):

As a replacement when the wire catch of the original hook is deformed.

Wire hook (motor side):

As a replacement when the wire catch of the original hook is deformed.

Allen wrenches
Tension gauge (capable of exerting a push force of at least 1 kg (9.8 N))

[Procedure]
[1]

Remove the end cover using an Allen wrench of 1.5 mm across flats.

[2]

Remove the screw cover using an Allen wrench of 2.0 mm across flats.