IAI America RCL-RA3L User Manual
Page 41
3. Connecting with the Controller
35
• PIO line, communication line, power and driving lines are to be put separately from each other and
do not tie them together. Arrange so that such lines are independently routed in the duct.
Follow the instructions below when using a cable track.
• If there is an indication to the cable for the space factor in a cable track, refer to the wiring instruction
given by the supplier when storing the cable in the cable track.
• Avoid the cables to get twined or twisted in the cable track, and also to have the cables move freely
and do not tie them up. (Avoid tension being applied when the cables are bent.)
Do not pile up cables. It may cause faster abrasion of the sheaths or cable breakage.
Power line
I/O lines (flat cable)
Duct