IAI America RCA2-SA6R User Manual
Page 73
65
13. Maintenance Inspection
13.7.3 How to apply grease
When side cover and stainless sheet are present, remove these before beginning.
(1)
For the guide section, apply the grease by moving the slider back and forth and spreading it out,
either by pushing a scraper between the slider and base or by lubricating with a grease injector.
Grease the guides on both sides.
Pinch in the direction of the arrows
to remove ball screw cover
Ball screw cover
(Note) There is no side cover for RA2AC and RA2AR.
Remove the stainless steel sheet and apply grease to the guide from upper side.
When complete, wipe away any excess grease.
Slider type
Slider type
Caution:
In case the grease got into your eye, immediately go to see the doctor to get an
appropriate care.
After finishing the grease supply work, wash your hands carefully with water and soap
to rinse the grease off.