IAI America RCA2-SA6R - Manual (Page 56)

48
9. Installation
R0.3 or less
9.3 Mounting Surface
The platform to install the actuator should possess a structure that ensures enough stiffness,
and should be free from vibration.
RCA2-SA3C, SA4C, SA5C, SA6C, SA3R, SA4R, SA5R, SA6R
Follow the diagram below when installing the device using the reference surface.
Model Length of A (mm)
Slider type 2 to 4 or less
Reference
surface
Reference
surface
Slider type
The side and bottom faces of the base provide reference surfaces for slider travel. When it is
necessary that the slider moves in a highly precise fashion, ensure that the device is installed at
the direction that is based on the position of these surfaces.
Caution: Because the side and bottom faces of the base provide reference surfaces for slider travel
as shown in the above diagram, conduct installation based on the position of this side
when precision is required.