Sonnet Technologies Web Management Tool - Manual (Page 41)

35
1.8 Modify Storage
Advanced CLI Page
Changes to various parameters may be made using the Advanced CLI
page.
Note: The Sonnet Web Management Tool is the preferred method to
manage the Fusion storage system.
1. If you’re not already in the Sonnet Web Management Tool,
type the IP address of your RX1600Fibre in a standard
browser. On the splash screen, click E
nter Here. In the box
provided, type in your user name and password, and then
cl
ick OK.
2. Click the Advanced button on the left side of the window.
3. The Advanced CLI Configuration page appears. See
Figure 37 on page 41.
4. Wait for the Ready prompt, then type in the CLI command
in the text box provided. Refer to CLI Provides an ASCII-
based Interface on page i of Appendix A.
5. Click the Submit button: this is equivalent to typing in the
CLI command into a Telnet or serial port CLI session.
A text field beneath the box lists the most recent commands
issued to the FastStream through this page. If you enter an
incorrect parameter, the CLI help text is displayed, showing
the parameters available. An asterisk next to the Ready prompt
indicates you must type SaveConfiguration restart in the text box
for changes to take effect.
WARNING: Do not use this page unless you are directed
to by a Sonnet technician. Changing parameters may cause
loss of data and/or disruption to the performance and reliability of
the Fusion storage system.