beautypg.com

5 remote system monitoring – Sonnet Technologies Web Management Tool User Manual

Page 27

background image

21

When an event occurs that warrants Email notification, the
RX1600Fibre sends the message; it cannot respond to a rejection by a
server for an invalid address
. Ensure all Email addresses typed in
are valid
. Each Email is time stamped when it is sent as part of
the SMTP header information.

1. If you’re not already in the Sonnet Web Management Tool,

type the IP address of your RX1600Fibre in a standard
browser. On the splash screen, click E

nter Here. In the box

provided, type in your user name and password, and then
cl

ick OK.

2. The Health and Status Monitor page appears. Click the

Manage button on the left side of the window.

3. The Manage menu page appears. Click Fusion RX1600Fibre.

4. Click the Set Up Error Notification button.

5. Click Next. The Error Notification page appears. See

Figure 19 on page 22.

6. Click the Enabled radio button for Notification

Configuration.

7. Type in the sender address or use the default. (Emails show

this name in the

From field).

8. Type or use the default SMTP Server (the Email server) IP

address or the name of the SMTP server and, if required, the
user name and password used to log into the server.

9. Type in up to five Email addresses.

10. Choose All, Critical, Warning, Informational or None for

each Email address.

11. When all information is typed in, click Commit.

12. A warning box appears. In the warning box, verify that you

want to complete the notification procedure including a
restart of the RX1600Fibre by clicking

Yes. Clicking No ends

the procedure without making a change.

13. Your settings are displayed. You may change or disable Email

notification at any time from the Error Notification page.

You may set up the Fusion RX1600Fibre to send notifications using
Email when certain events occur.

You may set up the RX1600Fibre to send notifications using
the Sonnet Web Management Tool’s

Error Notifcation page

when certain events occur. You designate the person or people
receiving notification of conditions and the level of severity
which prompt Email notification.

Types of Errors
• Device/drive errors such as medium error, aborted command

and hard error

• Device/drive transitions from online to offline

• Critical and warning temperature conditions

• Critical and warning voltage conditions

• Power recycle/power failure conditions

• Enclosure issues

Warning messages
• Device down

• Medium error

• Abort command

Message Severity Levels

Critical: critical event Emails

Warning: warnings and critical event Emails are sent

Informational: information which you may want to know
but which probably does not require action: only information
messages are sent

All: warnings, critical events and informational messages

None: no Emails are sent

Email Notification Setup

Phone home Email notification enables the RX1600Fibre to send
an Email message to you, a network administrator or other users
when certain events occur with the storage system.

Messages about serious errors are sent immediately, while
messages for less serious errors are sent every 15 minutes. You
may send messages to up to five Email addresses and designate
which conditions prompt each Email notification. For example, a
recipient set to receive only critical severity level messages receives
critical messages and not warning or informational messages.

1.5 Remote System Monitoring