Ransburg RMA-560 Single_Dual Purge Direct A13364 - Manual (Page 9)

INTRODUCTION
FEATURES
Features which make the RMA-560 advantageous
for use in electrostatic applications include:
• True dual purge capability. Spray one color
while cleaning the other paint line with no loss
of tip voltage.
• Assembly components made of durable engi-
neered resin material for optimum mechanical
strength and solvent resistance.
• Heavy duty design insures excellent service
life even when subjected to the quick motions
of robotic applications.
•
Proven long life turbine motor capable of
speeds up to 80 krpm. (See “Specifications”
in the “Introduction” section of this manual for
bell cup speed ratings.)
• Serrated and non-serrated bell cups are
available for application flexibility and color
match. All bell cups are made using Titanium,
Aluminum or Coated Aluminum. The 55mm
Bell Cup is Titanium only.
• Aerodynamic design for ease of cleaning
external surfaces.
• 60° angled body provides more maneuver-
ability and facilitates robotic programming.
• Small light weight package allows better ma-
neuverability in tight areas.
• Negligible maintenance down time. With the
quick disconnect feature, an atomizer can be
changed in less than 2 minutes for off-line
maintenance.
•
The easily removable front and rear shrouds,
turbine assembly and the internally mounted
fluid valves, make off-line maintenance more
efficient and economical. A split shroud is avail-
able for easy access to internal components
while still mounted on the robot.
• Fast color changes are achieved using center
feed fluid delivery and the fluid valves provide
for simultaneous paint push while solvent
washes the feed tube and bell cup interior.
• Internal and external bell wash is quick and
efficient. Solvent is controlled at the feed tube
with an internally mounted solvent valve. Ex-
ternally mounted regulators control the flow.
• Less waste to the spray booth, with the dump
valve located internally next to the feed tube.
• No external high voltage cable. The internally
mounted high voltage cascade requires only
low voltage control wiring.
• Compact high voltage control system. The
MicroPak™ Cascade control takes only 1/4
of the space in a 19-inch Euro rack, leaving
room for additional control modules.
• Various adapter plates available to match most
robotic mounting configurations.
• Direct charging of fluid (solvent borne paint)
promotes high transfer efficiency.
• Large range of fluid tip sizes available.
• Optional repulsion ring and shroud for tighter
pattern control and less overspray.
• Fitting less tubing bundle, more flexibility in the
robot wrist and easier to repair damaged tubes.
• Valve manifold can be ordered as a single or
dual purge version.
APPLICATOR DESCRIPTION
The RMA-560 is an automatic robot mounted
rotary atomizer capable of spraying solvent borne
coatings electrostatically or non-electrostatically.
It incorporates the latest in high speed spindle
technology, bell cup and shape air design to pro-
vide the best in atomization and pattern control.
The bell cups are designed for durability using the
best materials available. All wetted components
are designed to offer the maximum in wear and
chemical resistance. The atomizer incorporates
an integrated internal cascade capable of applying
100,000 VDC directly to the coating materials.
RMA-560 Single/Dual Purge Direct Charge - Introduction
Ransburg
LN-9278-13 6