Ransburg RMA-560 Single_Dual Purge Direct A13364 - Manual (Page 65)

External and Internal Cup Wash
Fittings and Tubes
The cup wash fittings at the Shaping Air Manifold
and the Rear Plate Assembly are installed with the
tapered end of the ferrule away from the fitting.
The fittings are tightened into the manifold and the
rear plate until snug, then 1/8 more turn. These
ferrules are Black in color.
The cup wash fittings and ferrules on the splitter
block and the back face of the knuckle assembly
and installed with the tapered end of the ferrule
towards the fitting. The external cup wash tube
goes through the knuckle body to the shaping air
manifold. You must install the fitting and ferrule
over the tube before passing it through the body.
Insert the ferrules and fittings into the appropriate
ports and tighten until you hear or feel the fitting
click into position. These ferrules are White in color.
RMA-560 Single/Dual Purge Direct Charge - Maintenance
Ransburg
LN-9278-13 62