Audiovox SMT5600 User Manual

Page 62

Smartphone User Manual

Using your camera

Smartphone User Manual

Using your

camera

In the previous figure, the Title Bar indicates

Zoom mode.

This means you can press the Up and Down buttons to

Zoom In and Out.
Or, when in Zoom mode, you can press the Action button

to switch to

Pan mode. If the image is too large to fit in the

display area, you can press the Up, Down, Left, or Right

buttons to pan the image to the desired position.
Commands on the menu in the Review screen vary according

to the type of captured file, as follows:

Play — This command is available on the menu only if the

newly-captured file is a video file. A Progress Bar at the bot-

tom of the screen will indicate progress of the playback.

Send — via E-mail, via MMS, or via Bluetooth/Infrared

beaming:
If the newly-captured file is a video file in Motion-JPEG AVI

or MPEG-4 format, the

Send submenu contains the via

E-mail command, which invokes a new Compose E-mail

screen with the file already attached. If the new file is a

video in H.263 format, or if it is a still image (Photo, Photo

ID, Picture Theme), both

via E-mail and via MMS are avail-

able on this submenu. (The MMS Composer application is

explained in Chapter 6.)
Finally, the

Beam File command on the Send submenu lets

you beam the file using either Infrared or Bluetooth. After

you select

Beam File,

the Send Data screen will open. Align

your Smartphone port with the port of the other device. When

a device is detected, the device name will be displayed on

the screen. If an Infrared device is detected, the file(s) will

be beamed directly. If a Bluetooth device is detected, press

the Left Softkey (“Beam”) to start beaming.