E-Mon E-PS-A-RTU-N - Manual (Page 54)

Chapter 3 Display
O P E R A T I O N S M E N U O P E R A T I O N S
54 PowerSmart+ Advanced Power Quality Meter
The Reset menu allows you to separately reset minimum/maximum log records,
maximum demands and counters.
To reset the desired registers:
Highlight the middle window by pressing briefly the SELECT button.
Select the desired entry by scrolling through the list with the UP and DOWN arrow
buttons until the desired entry appears.
Press the SELECT button briefly to highlight the lower item.
Press and hold the ENTER button for 5 seconds.
Release the button. The “do” entry is replaced with “done” showing the operation is
complete.
The following table shows available options.
Label Description
Lo.Hi Clears Min/Max log
A.dnd Clears maximum ampere, volt and harmonic demands
P.dnd Clears maximum power demands
dnd Clears all maximum demands
Enr Clears all total energies
tOU.d Clears summary and TOU maximum demands
tOU.E Clears summary and TOU energy registers
Cnt Clears all counters
Cnt1 – Cnt4 Clears counter #1-#4