Asante Technologies 6000 Series - Manual (Page 80)

Menus
Page 5-22
TrapRecv
This menu allows you to determine the management stations that will
receive traps from the device.
Table 5-16 describes each field in the TrapRecv menu.
∆
Note: For instructions on using this menu, see “Manag-
ing Trap Receivers” on page 4-16.
Table 5-16 Trap Receiver Menu
Field Description
Status Configurable field; determines the status of the trap
receiving station’s entry.
❏
valid — the trap receiving station’s entry is
active.
❏
invalid — the trap receiving station’s entry is
not active (deletes the entry when selected).
Trap Receiver
Address Configurable field; determines the IP address of the
management station that can receive traps.
Community String Configurable field; determines the write community
string of the trap receiving management station.
Book Page 22 Thursday, September 18, 1997 4:28 PM