Asante Technologies 6000 Series - Manual (Page 62)

Menus
Page 5-4
Configuration
This menu is not a management option; it is a title for the configuration
sub-menus listed below it. This menu CANNOT be selected.
Identify
This menu provides read-only and configurable identification informa-
tion for the device.
Table 5-2 describes each field in the Identify menu.
∆
Note: For instructions on using this menu, see “Config-
uring Device Identification Information” on page 4-8.
Table 5-2 Identify Menu
Field Description
PhyAddr Read-only field; displays the device’s hardware
address.
ObjectID Read-only field; displays the device’s SNMP identify-
ing number.
Description Read-only field; displays a description of the device.
Name Configurable field; assigns a name to the device.
Note: A maximum of 254 characters (including
spaces) is allowed.
Location Configurable field; assigns a location to the device.
Note: A maximum of 254 characters (including
spaces) is allowed.
Contact Configurable field; assigns a name of the person
responsible for the device.
Note: A maximum of 254 characters (including
spaces) is allowed.
Up Time Read-only field; displays the amount of time the
device has been operational since the last time it was
off-line (in days, hours, minutes, and seconds).
Interfaces Read-only field; displays the number of network inter-
faces present on the device.
Book Page 4 Thursday, September 18, 1997 4:28 PM