Asante Technologies 6000 Series - Manual (Page 35)

Configuring Port Parameters
Page 4-13
Configuring Store-and-Forwarding
Store-and-forwarding is a port’s ability to store incoming packets before
forwarding them.
To configure a port’s store-and-forwarding ability:
1
Click PortCtrl.
You do not have to select any port on the front-panel
image.
The Port Control table appears.
2
Click once on the row of the port you want to config-
ure.
3
Click Modify.
The “Modify Dialog” box appears.
4
Open the StNFw drop-down menu and select
Enable.
5
Click Apply.
The port is configured for store-and-forwarding.
Book Page 13 Thursday, September 18, 1997 4:28 PM