PASCO PS-2006 GLX Power Amplifier - Manual (Page 8)

®
P S - 2 0 0 6 G L X P o w e r A m p l i f i e r O u t p u t S c r e e n
6
Wave Polarity This setting has two options: Positive and Negative,
which affect the output functions as illustrated.
To Turn the Output On or Off
• Press .
To Change an Output Setting
Use the arrow keys to highlight a setting in the Output screen. Use one
of the following methods to change the value of the setting.
Method 1 (for Output Device, or Waveform):
1. Press . A menu opens.
2. Use the arrow keys to highlight a menu option and press
Method 2 (for Amplitude, Voltage, Offset, Frequency, or
Period):
• Press or to increase or decrease the value.
Method 3 (for Frequency or Period):
• Press or to increase or decrease the value.
Note: The increment or factor by which the value changes is determined by the
Step Size setting (see below).
Method 4 (for Amplitude, Voltage, Offset, Frequency, or
Period):
1. Press .
2. Type the desired value and press .
Method 5 (for Period Units, Repeat Mode, or Wave Polarity):
• Press . The setting switches to the other option.
To Change the Step Size
1. Use the arrow keys to highlight Voltage, Amplitude, Offset, Fre-
quency or Period.
2. Press . A menu opens.
3. Use the arrow keys to:
• Highlight a standard step size and press .
or
a. Highlight Custom Step and press .
b. Type a step value and press .
F1
+
X
F2