PASCO PS-2006 GLX Power Amplifier - Manual

Important Note
Update your Xplorer GLX
before connecting the GLX Power Amplifier.
The Power Amplifier requires firmware version 1.44 (or later)
to be installed on your Xplorer GLX. Follow these steps to
update your Xplorer GLX.
1. Go to www.pasco.com/glx.
2. Click GLX Firmware Update.
3. Download the latest version of DataStudio.
4. Install DataStudio on your computer.
5. Run DataStudio.
6. Turn on the GLX and connect it to the computer.
Result: DataStudio installs the latest firmware on the GLX.
Questions?
Contact PASCO Technical Support.
Phone: 916-786-3800 (worldwide)
800-772-8700 (U.S.)
Fax: (916) 786-7565
Web: www.pasco.com
Email: [email protected]
®