Micromod MOD: 30ML Controller Operation and Maintenance Training Manual - Manual (Page 51)

Training Manual
MOD 30ML Diagnostics Lab
4 - 3
page1
6 Press NXT to display the next event
in the queue. Page 1 of the next event will be displayed next.
7 Use the block type and event code,
to locate the event description and
recommended action listed in
Section 7.3. Pressing the DOWN arrow will display the time at
which the event occurred and line 6 will display the
nature of this event – in this example, the “INST IN
RUN” is the event and it means that the instrument
was put in RUN mode. This is an information only
type event and line 6 displays “INFOONLY”
Figure 4 .2.
8 Press NXT to display the next event
in the queue. Page 1 of the next event will be displayed next.
9 Use the block type and event code,
to locate the event description and
recommended action listed in
Section 7.3. Pressing the DOWN arrow will display the time at
which the event occurred and line 6 will display the
nature of this event – in this example, the “INST IN
RUN” is the event and it means that the instrument
was put in RUN mode. This is an information only
type event and line 6 displays “INFOONLY”
10 Continue using the NXT, Down, Up
sequence to view all the event data
in the queue.
11 Press the TAG key to return to the
DEVICE/EVENTS display.