Micromod MOD: 30ML Controller Operation and Maintenance Training Manual - Manual (Page 49)

4 - 1
4 MOD 30ML Diagnostics Lab
4.1 Foreword
The MOD 30ML provides a comprehensive way of displaying active diagnostic
information as well as a history of events. Events are a combination of alarms and
information only activities that the instrument had gone through.
4.2 Objectives
We learnt how to read the active diagnostics and acknowledge them in Chapter1. In this
lab we will read the diagnostics history by using the Event Viewer available from the
front-face. We will also force the instrument to shutdown and read the shutdown
information.
After completing this lab, you should know how to read the Event Queue of the controller
and also the Shutdown information.
4.3 Equipment Required
You need the following equipment for this lab:
1. 1 x MOD30ML
2. 1 x Memory module (2010PZ10000A) marked SHUTDOWN (and loaded with the
SHUTDOWN.CDB file)
3. 1 x Small flat screwdriver