Micromod MOD: 30ML Controller Operation and Maintenance Training Manual - Manual (Page 29)

Training Manual
Single Loop Template Lab
3 - 7
Figure 3 .7.
13 Acknowledge UNCONFIG alarm by
pressing the ALARM key and the
AUTO key. The Alarm display will show INST UNCONFIG
saying that the instrument is unconfigured.
14 Press RET key
15 If line 2 displays DEL MAIN go to
Step 24 otherwise continue at step 23. If the instrument state has not changed, you will
return to the same line in the database DEL
MAIN
. If the instrument state has changed you
will abort to top level with DEV STAT displayed
on line 6.
16 Press DOWN and NXT key 2 times.
Press DOWN key again.
Press NXT key 5 times.
Line 2 should now display DEL MAIN
17 Press NXT key
RES MAIN
is displayed on Line 2. This is
“Restore Main Database” which can be used to
“upload” what is in the running database and
restore it to the configuration database.