Hardware change summary, Appendix b - summary of hardware differences – Micromod MOD: MODCELL Multiloop Processor 2002N Model C and Associated Hardware User Manual
Page 75
MODCELL Multiloop Processor
APPENDIX B - SUMMARY OF HARDWARE DIFFERENCES
APPENDIX B - SUMMARY OF HARDWARE DIFFERENCES
B.1
GENERAL
This document is written to reflect the latest model and version of the instrument. The
summary provided below notes the differences between the current instrument hardware
considerations and the previous. See the database reference books for a summary of
version differences.
B.2
2002P REGULATORY CONTROL IDENTITY MODULE
NOTE:
This identity module was replaced by 2004P version 2
The identity module gives the processor a specific level of process and communications
functionality. The regulatory control identity provides the same capability as the logic
control identity module plus PID block functionality.
Catalog Number Description for 2002P
BASE NUMBER
2002P
Regulatory Control Identity Module
UNUSED
Z
Unused Character
ELECTRICAL CODE
10
General Purpose, Kent-Taylor standard
FUNCTION
1
Logic and Regulatory Control
FIRMWARE VERSION 01
Version 1
02
Version 2 (adds same as 2001P version 3)
03
Version 3 (Same changes as 2001P Version 4)
MODEL
A
Design Level (256K PROMs)
B
Design Level (512K PROMs)
Sample Number
2002PZ10103A (Product is serialized)
B.3
2010A COLD JUNCTION COMPENSATION MODULE
NOTE: This product has been replaced by the 2009A RTD Module (2 wire with CJC sensor).
The Cold Junction Compensation Module supports multiple 2013A Thermocouple Input
Modules to provide the necessary signal conditioning for thermocouples. Note that only
one CJC module is required per processor to sense the temperature at the terminal block.
This module uses the Cold Junction Input Module (CJIM) Block for configuration of input
parameters. A cold junction sensor (225S2) is shipped with the module. The module can
be located in any slot.
CJIM
Catalog Number Description for 2010A
BASE NUMBER
2010A
Cold Junction Compensation Module
UNUSED
Z
Unused Character
ELECTRICAL CODE
10
General Purpose, Kent-Taylor standard
UNUSED
000
Unused Characters
6
7
3
4
5
2
1
MODEL
A
Design Level
Sample Number
2010AZ10000A
69