Micromod MOD: MODCELL Multiloop Processor 2002N Model C and Associated Hardware - Manual (Page 16)

MODCELL Multiloop Processor
PRODUCT DESCRIPTION
1.4.8 2006A Nonisolated Digital Input Module
The Nonisolated Digital Input Module is primarily intended for instrument-to-instrument
signaling. The module interfaces 24-volt on/off signals with no isolation or accepts switch
contact closures without external power requirements. This module uses the Digital Input
Module (DIM) Block for configuration of input parameters.
DIM
Catalog Number Description for 2006A
BASE NUMBER
2006A Nonisolated Digital Input Module
UNUSED Z Unused Character
ELECTRICAL CODE 10 General Purpose, standard
NOTE: Code 12 For EU Compliance, use on 2002NZ12... ONLY
3
4
5
2
1
INPUT RANGE 10 2.2 V to 24 VDC
UNUSED 0 Unused Character
MODEL A Design Level
Sample Number 2006AZ10100A
1.4.9 2007A Nonisolated Digital Output Module
The Nonisolated Digital Output Module is primarily intended for instrument-to-instrument
signaling. The module interfaces 24-volt on/off signals with no isolation or works as an
open collector switch that also supports 5V TTL. This module uses the Digital Output
Module (DOM) Block for configuration of output parameters.
DOM
Catalog Number Description for 2007A
BASE NUMBER
2007A Nonisolated Digital Output Module
UNUSED Z Unused Character
ELECTRICAL CODE 10 General Purpose, standard
3
4
5
2
1
OUTPUT RANGE 10 24 V, 50 mA TTL
UNUSED 0 Unused Character
MODEL A Design Level
Sample Number 2007AZ10100A
10