Micromod Micro-DCI: 53ML5100A LOADING STATION - Manual (Page 50)

5.6 PARTS LIST
The parts list is provided in Table 5-1 and the parts breakdown is illustrated in Figure 5-1.
Table 5-1. Parts List
Key Part Number Description
1 612B395U02 Case
2 686B689U03 Main Printed Circuit Board
3 164B130U03 Power Supply - 120/220/240 V ac, 50/60 Hz
3 164B130U04 Power Supply - 24 V dc
4 698B179U07/U08 Front Display
5 686B598U01 Rear Terminal Board
6 677B942U01 Cable - Display to Main PCB
173D109U03 U.S. Power Cord - 120 V ac, 50/60 Hz
355J093U01 Trim Collar for Single Case
614B836U01 Trim Collar and Spacers for Two Cases
614B836U02 Trim Collar and Spacers for Three Cases
614B836U03 Trim Collar and Spacers for Four Cases
614B836U04 Trim Collar and Spacers for Five Cases
614B836U05 Trim Collar and Spacers for Six Cases
614B836U06 Trim Collar and Spacers for Seven Cases
614B836U07 Trim Collar and Spacers for Eight Cases
614B836U08 Trim Collar and Spacers for Nine Cases
614B836U09 Trim Collar and Spacers for Ten Cases
614B762U02 Kit of Three Plates for 3 X 6 Instrument Panel Cutout
123G001U01 Two panel Mounting Brackets
612B403U01 Panel Opening Filler Parts (used to fill panel opening if case and
instrument are removed).
5.7 SUPPLEMENTAL INFORMATION
An illustration of the pin assignments for the Hand Held Configurer connector are provided in Fig-
ure 5-2.
53ML5100 Manual Loading Station
5-4