Micromod Micro-DCI: 53ML5100A LOADING STATION - Manual (Page 31)

3.3.2 DISPLAYING A DATAPOINT
The following procedure illustrates how to display the contents of datapoint B012, which is the dis-
play brightness index (the normal setting is 4; 0 is the brightest and 7 is the dimmest setting). Fig-
ure 3-9 contains supporting illustrations for the display procedure described in Table 3-2.
Table 3-2. Procedure to Display a Datapoint
Step Press
Once
Shift
Result
Press to
Locate
Target
Char.
Result
1 l Puts instrument in engineering mode.
2 If DISPLAY does not appear, press 2.
3 3 Displays entry line: POINT .
4 B Puts B on entry line: POINT .B.
5 .B ∆ 1 Shifts B and puts 1 on entry line:
POINT .B1.
6 .B1
∆
2 Shifts B1 and puts 2 on entry line:
POINT .B12.
7 3 Enters address to display datapoint contents.
The address with the contents are displayed as
follows: B12 4.
8 z Returns instrument to operator mode.
Notes:
∆
= space. Also, B12 can be entered for B012, as datapoints 99 or less for all of the data
types (e.g., A, B, C, H, and L - see Table 4-1) do not require leading zeros.
Addressing a Datapoint Displaying a Datapoint Contents
Figure 3-9. Displaying a Datapoint
53ML5100 Manual Loading Station
3-8