Micromod Micro-DCI: 53ML5100A LOADING STATION - Manual (Page 46)

Table 4-6. System Module
Purpose: This module is used to set the instrument tag name and the display brightness.
Title Symbol System
Module
Data-
point
De-
fault
Attribute
Display
Brightness
Index BRIGHT B012 4 This parameter controls the display screen
intensity. A value of 0 is the brightest and a
value of 7 is the dimmest intensity. Normal
viewing setting is 4.
Model Number
Low (Display
Only) A190 Factory
Set
It contains the first ten characters of the model
number.
Model Number
High (Display
Only) A191 Factory
Set
It contains the last ten characters of the model
number.
Datalink
Disable DLD L257 1 This instrument does not have network
capabilities; therefore, the datapoint should be
left at its default value of 1, to indicate no
Datalink capabilities.
Unit Tag
Name TAG A008 ABB
ML5100
It is an assignable 10 character name for the
system module.
Section 4. Configuration Parameters
4-7