Luminex FLEXMAP 3D User Manual - Manual (Page 67)

Installation of the Luminex
®
FLEXMAP 3D
®
The following installation instructions for Luminex ® FLEXMAP 3D ® are to be used for site
prep, assessing facilities requirement and in the event cabling or tubing must be reconnected.
NOTE: If you do not intend to keep the packing material for future use,
return the packaging of the product, spare parts, and options to the
manufacturer with the Field Service Engineer. Within the European
Union and other jurisdictions, in accordance with the European
Parliament and Council Directive 94/62/EC regarding packaging and
packaging waste, the manufacturer is responsible for the disposal of
packing material.
To install FLEXMAP 3D ® :
1. Place the PC and monitor on the right side of the instrument.
Appendix B: Installation
57