Mechanical components, Swivel base, Indicator lights – Luminex FLEXMAP 3D User Manual User Manual
Page 16: Electrical components
![background image](/manuals/336890/16/background.png)
Mechanical Components
WARNING:
The Luminex
®
FLEXMAP 3D
®
instrument has parts that move
during operation.
Risk of personal injury is present. The moving parts present puncture,
pinching, and hand-crushing hazards. Keep your hands and fingers away
from the XY slot, syringe pumps, and sample probe during operation.
Observe all warnings and cautions. Keep the access doors closed during
normal operations.
Swivel Base
WARNING:
The optional swivel base available with the Luminex
®
FLEXMAP
3D
®
system includes moving parts and possible pinch points.
Those factors present the possibility of injury.
WARNING:
Use care when handling the swivel base to avoid pinch point
injuries.
WARNING:
Make certain the swivel base rests securely on a stable surface,
to avoid any possibility of toppling.
Indicator Lights
The lights inside the front door of the Luminex
®
FLEXMAP 3D
®
instrument indicate the on/off
status of the system and are harmless. The blue light-emitting diodes (LEDs) do not emit light
in the UV spectrum.
Electrical Components
WARNING:
Do not perform any maintenance or cleaning of the electrical
components in the system, with the exception of replacing
fuses.
The following fuse caution label appears on the back of the Luminex
®
FLEXMAP 3D
®
.
Luminex
®
FLEXMAP 3D
®
Hardware User Manual
6
For research use only. Not for use
in diagnostic procedures.