Luminex FLEXMAP 3D User Manual - Manual (Page 19)

Disposal of Instrument
NOTE: Within the European Union and other jurisdictions, in accordance
with Directive 2002/96/EC of the European Parliament and of the
Council regarding Waste Electrical and Electronic Equipment
(WEEE), you must properly dispose of electrical and electronic
equipment when it reaches its end of life.
If you are disposing of a Luminex ® FLEXMAP 3D ® instrument, decontaminate the system.
See the section titled “ Decontamination Procedure ”. Next, contact Luminex Technical
Support for a Return Material Authorization (RMA) number at +1-512-381-4397 (outside of
the U.S.). Return the equipment to the following Luminex location:
Luminex Corporation
12201 Technology Blvd., Suite 130
Austin, Texas 78727
USA
For information about disposal of FLEXMAP 3D ® outside of the European Union and other
jurisdictions, contact Luminex Technical Support at 1-877-785-2323 within the US and at
+1-512-381-4397 outside of the US.
For information about disposal of the barcode scanner, PC, or monitor, refer to the
manufacturer documentation.
For research use only. Not for use in diagnostic procedures. Safety
9