Luminex FLEXMAP 3D User Manual - Manual (Page 11)

Become familiar with the information in this chapter before using the equipment. Do not
perform procedures on your system that are not specifically contained in this manual, unless
you are directed to do so by Luminex Technical Support.
Description
The Luminex ® FLEXMAP 3D ® system is a life science research multiplex test system
intended to measure and sort multiple signals generated in an assay from a biological
sample. The FLEXMAP 3D system is for research use only and is not for use in diagnostic
procedures. The FLEXMAP 3D system is for laboratory and professional use only.
Warnings and Notes
The following informational notes and warnings appear as necessary in this manual.
NOTE: This message is used to provide general helpful information. No
safety or performance issues are involved.
CAUTION: This message is used in cases where the hazard is minor or only
a potential hazard is present. Failure to comply with the caution
may result in hazardous conditions.
WARNING: This message is used in cases where danger to the operator or
to the performance of the instrument is present. Failure to
comply with the warning may result in incorrect performance,
instrument failure, invalid results, or hazard to the operator.
DANGER: This message is used in cases where significant risk of serious
injury or death is present.
Chapter 1: Safety
1