beautypg.com

Magnum Venus Plastech Flex Molding Process MKVI Mix User Manual

Page 64

background image

MKVI Mix Meter System Operations Manual

Rev. 08/2013

Page | 64





















Note: it is important that the solvent level in the tank be at no less than 1/3 full or
so that there is 25mm (1”) of solvent above the SP4 solvent pump. This will allow
the SP4 solvent pump to properly refill with solvent after each use.

Maintenance

– The SP4 Solvent Pump is basically maintenance free however it might

be necessary to replace the O-ring (0464) on the Pump Foot Valve (4481).

It is important to keep the inside of the flush tank clean and free of dirt, debris and glass
fibers as these can prevent the Pump Foot valve from sealing properly.