Liquid Controls SP3850 - Manual (Page 52)

SP3850 Flow Computer
48
8.2 Test Sub-Menus
Display Notes Sub-menus
Audit Trail
Config_Audit nnnnn
hh:mm:ss mm/dd/yy
Cal_Audit nnnnn
hh:mm:ss mm/dd/yy
Audit Trail
Error history
Error history
Flow rate alarm low
Error history
Print System Setup
Print System Setup
Press ENTER to print
Print System Setup
—— Printing ——-
Print System Setup
MENU
Press Enter to view the audit trail information.
The configuration audit trail format:
nnnnn= number of critical menu changes,
hh:mm:ss; mm/dd/yy = time and date of last
change.
The calibration audit trail format:
nnnnn= number of calibration changes,
hh:mm:ss; mm/dd/yy = time and date of last
change.
Press Menu to get back to audit trail top-level
menu.
Press Enter to view error history.
NOTE: Press Print Key to print Error History. Printout
will include time/date of each errors first occurrence.
Press Up/Down arrow keys to scroll through
error message history. Press CLEAR to clear
entire error log.
Press Menu to get back to error history
top=level menu.
Press enter key to enter print system setup
submenu
Press enter to begin printing the system
setup.
This message will display as the data
transmission takes place.
Press Menu to get back to print system setup
top-level menu.
ENTER
MENU
ENTER
ENTER
MENU
ENTER
8.2.1
Audit Trail
Submenu Group
8.2.2
Error History
Submenu Group
8.2.3
Print System Setup
Submenu Group
MENU